Comment on page
How to connect to 3G / GPRS
After installing the SIM card activate PIN (Personal Identity Number), provided by your service provider:
- 1.Tap Start Up then Settings and Control Panel
- 2.Open NID WWAN (Wireless Wide Area Network) application.
- 3.Choose PIN in NID WWAN Configuration.
- 4.Enter the PIN from your service provider and tap Apply. SIM is now unlocked.
- 5.Tap Enter PIN automatically
Enable automatic connection. Automatic connect will start establishing connection to 3G / GPRS network after sleep mode.
- 1.Tap Start Up then Settings and Control Panel
- 2.Choose CONNECTION from NID WWAN Configuration
- 3.Tap YES at CONNECT AUTOMATICALLY.
If your service provider requires you to enter an Access Point Name, Username and password:
- 1.Choose OPERATOR from NID WWAN Configuration
- 2.Enter your ACCESS POINT NAME.
- 3.Enter your Username and Password
You will now be able to connect to the network.
- 1.Press Connect button to connect to 3G / GPRS Network
- 2.When connection is established State will change from Disconnected to Connected.